Internal grooves
Define groove depth and width from the relevant datum.
Recessed grooves · Entry and withdrawal
PCD Slot & Undercut Tools
Internal grooves and recessed cuts behind a shoulder.
Slot and undercut tools need a section of the finished groove and the opening used to reach it. Confirm head thickness and neck clearance together. The cutting width alone does not establish whether the cutter can enter or withdraw safely.
Internal grooves Recessed slots Back-side features
Application guide
Where pcd slot & undercut tools fit.
Use the part feature and its acceptance requirements to narrow the tool choice.
Recessed slots
Show the shoulder that blocks a conventional end mill.
Back-side features
Describe the approach and withdrawal motion.
Selection & configuration
Define the details that change the tool.
Confirm head thickness, neck length and withdrawal clearance. A drawing section is needed to check that the tool can enter and leave the groove.
| Decision | What to specify | Why it matters |
|---|---|---|
| Head thickness | Finished groove width and allowance | The cutter must fit the axial space. |
| Neck geometry | Clearance diameter and working length | The neck must clear the access opening during cutting. |
| Chip exit | Available space around the cutting head | An enclosed groove can trap chips. |
Swipe the table to compare all columns →
Build your configuration brief
Include these details so the tool dimensions and application can be reviewed together.
- Workpiece composition
- Feature drawing
- Profile tolerance
- Cutting access
- Production quantity
From drawing to inspection
Agree on what needs to be measured.
A tool specification should describe both the cutting geometry and the acceptance requirements. Mark critical dimensions on the drawing and discuss how they will be checked before ordering.
- Geometry reviewConfirm the profile, working length, access and critical dimensions.
- Inspection requirementsSpecify dimensional or profile checks and any reporting requirements.
- Application verificationAgree on sample evaluation where a new material, geometry or process needs a trial.
Selection questions
Before you order.
Practical answers for pcd slot & undercut tools.
Why is the access opening needed for an undercut tool quote?
The finished groove can be wider than its opening. The head and neck must be designed for entry, cutting and withdrawal, not only for the final cross-section.
What should I include when requesting pcd slot & undercut tools?
Workpiece composition; feature drawing; profile tolerance; cutting access; production quantity. Add the quantity and delivery destination. A drawing or marked part section helps identify critical dimensions and clearance constraints.
How are dimensions and delivery confirmed?
The quotation and agreed drawing define the tool configuration, inspection scope, quantity and delivery schedule. Reference images show the tool family; use the confirmed specification for ordering.
Start with your application
Request pcd slot & undercut tools.
Send your drawing or machining requirement. Your selected tool category and a checklist will be carried into the inquiry form.